CPU

·  Intel® Pentium® 4 Processor with Hyper-Threading Technology 

     - 800MHz and 533MHz FSB

·  Intel® Pentium® 4 Northwood Processor 

     - 533MHz and 400MHz FSB

·  Intel® Celeron® Northwood processor 

     - 400MHz system data bus 

  CPU Socket

·  Socket 478

  Chipset

·  Intel® 875P chipset

     - Intel® 82875P Memory Controller Hub (MCH)

     - Intel® 82801ER I/O Controller Hub (ICH5R)

  Memory

·  Supports dual channel (128-bit wide) memory interface

     - Each channel supports 2 DIMM sockets

·  Supports up to 4GB system memory

·  Supports Dynamic mode to optimize system performance

·  Synchronous operation with processor system bus

     - PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400) with 800MHz FSB CPU (supports PAT mode). DDR333 will run 

       at 320MHz memory frequency when used with 800MHz FSB CPU.   

     - PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU

     - PC2100 (DDR266) with 400MHz FSB CPU

·  Supports ECC/non-ECC DIMMs

·  Supports unbuffered DIMMs

  BIOS

·  Award BIOS, Windows® 98SE/2000/ME/XP Plug and Play compatible

·  Genie BIOS provides:

     - CPU/DRAM overclocking in 1MHz stepping

     - AGP/PCI/SATA overclocking

     - CPU/DIMM/AGP overvoltage

·  Flash EPROM for easy BIOS upgrades 

·  4Mbit flash memory

  Power Management

·  Supports ACPI specification and OS Directed Power Management

·  Supports ACPI STR (Suspend to RAM) function

·  Wake-On-Events include:

     - Wake-On-Keyboard/Mouse

     - Wake-On-USB Keyboard

     - Wake-On-Ring (external modem)

     - Wake-On-LAN

     - RTC timer to power-on the system

  Hardware Monitor

·  Monitors CPU/system temperature and overheat alarm

·  Monitors CPU/1.5V/5VSB/VBAT/3.3V/5V/±12V voltages and failure alarm

·  Monitors CPU/chassis/second fan speed and failure alarm

·  Automatic chassis/second fans on/off control 

·  Read back capability that displays temperature, voltage and fan speed

·  CPU Fan Protection function monitors the CPU fan during system boot-up

·  CPU Temperature Protection function monitors CPU  temperature during system boot-up

  Audio

·  20-bit stereo full-duplex codec with independent variable sampling rate

·  High quality differential CD input

·  True stereo line level outputs

·  S/PDIF-in/out interface

·  6-channel audio output 

  CSA Gigabit LAN

·  Uses 82547EI Gigabit LAN CSA interface

·  Integrated power management functions

·  Full duplex support at both 10, 100 and 1000 Mbps

·  Supports IEEE 802.3u auto-negotiation 

·  Supports wire for management 

  ATA RAID

·  Uses HighPoint 372N RAID controller

·  RAID 0, 1, 0+1 and 1.5

·  Two independent IDE channels support 4 hard disk drives (ATA/33, ATA/66, ATA/100, ATA/133 or EIDE)

·  Supports PIO modes 0/1/2/3/4, DMA modes 0/1/2 and UDMA modes 0/1/2/3/4/5/6

  IDE

·  Supports ATA/33, ATA/66 and ATA/100 hard drives

·  PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)

·  Bus mastering reduces CPU utilization during disk transfer

·  Supports ATAPI CD-ROM, LS-120 and ZIP 

  ICH5R Serial ATA with RAID

·  Supports two SATA (Serial ATA) interfaces which are  compliant with SATA 1.0 specification (1.5Gbps interface)

·  Supports RAID 0

  AGP

·  Supports 1.5V AGP 8x (2.13GB/sec.) and AGP 4x (1066MB/sec.) for 3D graphics applications (AGP 2x and 

     3.3V AGP card are not supported)

·  Supports AGP 3.0 and AGP 2.0 spec.

  Rear Panel I/O Ports

·  4 USB 2.0/1.1 ports

·  1 RJ45 LAN port

·  2 DB-9 serial ports

·  1 DB-25 parallel port

·  1 mini-DIN-6 PS/2 mouse port

·  1 mini-DIN-6 PS/2 keyboard port

·  3 audio jacks: line-out, line-in and mic-in 

  I/O Connectors

·  2 connectors for 4 additional external USB 2.0/1.1 ports

·  1 front audio connector for external line-out and mic-in jacks

·  1 connector for an external game/MIDI port

·  2 internal audio connectors (CD-in and AUX-in)

·  1 4-channel audio output connector

·  1 S/PDIF-in/out connector

·  1 connector for IrDA interface

·  2 RAID IDE connectors

·  2 Serial ATA connectors

·  2 IDE connectors

·  1 floppy connector

·  2 ATX power supply connectors

·  1 Wake-On-LAN connector

·  3 fan connectors for CPU fan, chassis fan and second fan

  Expansion Slots

·  1 AGP slot 

·  5 PCI slots 

  Compatibility

·  PCI 2.2 and AC ’97 compliant

·  Intel AGP version 3.0

  PCB

·  4 layers, ATX form factor

·  30.5cm (12.05") x 24.4cm (9.6")